| |
| Select
Specifications Catagory |
Made
In The
USA
|
All
materials used in manufacturing the BodyMaster™
System
and Accessory Kits are made in the USA, and all
tolerances
meet or exceed US Federal ASTM, AISI, and SAE standards. |
| |
| |
|
|
|
|
|
|
|
|
| Locking
Features |
|
|
| |
| |
Lifting
Carriage :
· DirectLoc™
high grade bolt lock system.
· Spring
release emergency locking system ~ locks the lifting carriage in place
instantly if the cable looses tension
for any reason while raising or
lowering.
· Tower-to-tower
RigidLoc™ telescoping support with bridge
~ locks the rotation assemblies and the support arms
together to form a ridgid square
jig with a tolerance of +/– 2mm at maximum weight load.
· 360°
tilt & rotation lock with detents at each 15° interval.
|
| |
Winch
Head & Winches :
· Winch
head cable locking support feature.
· Dual
mechanical winch locks. |
| |
Crossmember
Assemblies :
· Multiple
DirectLoc™ high grade bolt lock systems.
· Micro
tolerance component interlock design. |
| |
Lifting
Tower Assemblies :
· Hardened
5/8”diameter pin for removable base extension.
· Diagonal
supports with Clevis Locks.
· Multiple
DirectLoc™ high grade bolt lock systems.
· Micro
tolerance component interlock design.
|
|
|
|
|
|
|
| Materials
& Construction |
|
|
|
Lifting
Towers / Bases / Welded Brackets / Carriage Assemblies :
· Zero
tolerance jig welded and precision machined component construction.
· Type
C 1/4" wall square structural steel tubing:
U.S. made ASTM-A-500C.
· ¼”
thick gussets, sleeves, and plates in load-stress areas.
· Hardness:
RB89 (Rockwell B-SCALE)
· Tensile
strength: 62,000 psi.
· Carriage
Assemblies: Internal 10,000 lb load-rated
stainless steel bearing system
with
hardened steel sleeve retainer. |
|
Tilt
& Rotation Assembly
:
· 5/16"
wall round structural steel tubing: U.S.
made ASTM-A-513 grade 1026 cold drawn DOM.
· Hardness:
RB89 (Rockwell B-SCALE)
· Tensile
strength: 87,000 psi
· Micro
tolerance 9” sleeve type roller system. |
|
Connecting
Tubes / Support Bars :
· BodyMaster
Basic: Type C 1/4" wall square structural
steel tubing - U.S. made ASTM-A-500C.
· ProJig™
Support Kits:
Arm support
bar extensions: Type C 3/16” wall
square structural steel tubing - U.S. made ASTM-A-500C.
RigidLoc™
2 piece support bar: Type C 1/4"
wall square structural steel tubing -
U.S. made ASTM-A-500C. |
|
Pulling
Gussets :
· 3/8"
thick, heat tempered, structural grade U.S. steel plate. |
|
Support
Gussets :
· 1/4"
thick structural grade U.S. steel plate. |
|
Vehicle
Attachment Brackets :
· 5/8"
thick structural grade U.S. steel plate. |
|
Winch
Head Pulleys
:
· 2
½” stainless steel U.S. made roller bearing pulleys. |
|
Locking
Hardware :
· Carriage
and rotation hardware: 5/8”
diameter grade10.
· All
other hardware: 1/2” diameter
grade 8.
|
|
Note:
All
components have complete seam-welded construction. (no cast components) |
|
|
|
|
|
|
Dimensions
& Weights |
|
|
| |
BodyMaster
Basic System :
· Total
system weight: 553 lbs.
· Individual
lifting tower dimensions (assembled):
Height - 54" Width - 60" Depth
- 7" (base extension adds 8").
· Maximum
individual component weight: 32.5
lbs.
· Maximum
individual crossmember length: 6
ft.
· Required
storage space: 2' x 3' x 3'
· Ground
clearance: 4" |
|
Extended
Lift Kit :
· Total
kit weight: 87 lbs.
· Total
extended tower height: 72 inches |
|
Yard
Castor Kit :
· Total
extended ground
clearance: 10 inches
· Total
extended tower width (at base): 72
inches |
|
|
|
|
|
|
|
|
|
|
| Assembly
& Usage Times |
|
|
| |
BodyMaster
Basic System :
· Tower
assembly (2 towers): 10 -20 minutes
· Attachment
time: 5 -15 minutes
· Body
raising time:
3 -10 minutes
Times may vary due to unique body design
or vehicle condition. |
|
|
|
|
|
|
| Maximum
Load Capacities |
|
|
| |
BodyMaster
Basic System :
· BodyMaster
maximum load capacity (2 tower system):
3,000 lbs.
· Maximum
load capacity per each attachment arm (2 per tower):
750 lbs. |
| |
BodyMaster
with ProJig™
Support Kit :
· Maximum
load capacity per each attachment arm (2 per tower):
500 lbs. |
| |
BodyMaster
with Extended Lift Kit :
· Maximum
load capacity when lifting carraige raised over 48":
2,500 lbs. |
|
|
|
|
|
|
| Vehicle
& Frame Types |
|
|
|
Vehicle
Types :
· Use
for Full-frame, Sub-frame, and Unibody vehicles. |
|
Frame
Types :
Ladder Type
Cage-Type
Perimeter Frame X-Frame
Wide-track Perimeter Most
Custom Frames |
|
Large
Unibodies :
· For
large Unibodies like 60s Mopars, convertibles, and wagons we recommend
using the ProJig Support System
for lifting and holding. |
|
Extra
Long and/or Extra Heavy
:
· For
very heavy or extra long vehicles like limosines and estate cars use
the BodyMaster Xtreme System.
Lock both BodyMaster systems together to
form a four tower lift with 8-12 point holding system. |
|
|
|
|
|
|
|
|
|
|
| Attachment
Ranges |
|
|
| |
Attachment
Locations :
· BodyMaster
Attachment Brackets connect to 4 of the vehicle's bodymounts or factory
jig mounts
(attachment points) - 2 on each side of vehicle,
front and rear of central body area. |
| |
Attachment
Ranges :
· Attachment
points minimum height off ground: 10
inches.
· Attachment
points separation distance on opposite sides of vehicle:
adjustable from 32" - 72".
· Attachment
points separation distance on same side of vehicle:
adjustable from 18" - 42".
|
| |
Tower
to Tower Width Range :
· Upper
and lower crossmember assemblies width range:
adjustable from 7ft. - 8ft. |
| |
Lifting
Range :
· Lifts
load attachment points to 48" off floor. |
| BACK
TO TOP |
| |
|
|
|
|
|
|
|
|
|
